LED Heart Cycle Lamp Suite LED Flashlight DIY Kit Electronic Production kit

Description

Visit store
Items for sale
About us
Product Details
1. Suite Features
XSD-18 Cycle Lamp is a kind of lamp which with great appearance of streamlines and color appearance. 18 pieces of Tri-color LED in this suite are divided into three groups and formed a heart-shaped pattern. The transistor oscillates the drive of circuit and let the Tri-color heart-shaped pattern roll in a clockwise direction and start light. The light looks more colorful and dynamic, especially when used at night. It's the best choice for the festive gift.
PCB board Dimensions: 48MM * 51MM
2. Principle of Circuits
As it shown on below diagram, 18 pieces of LED have been divided into three groups: D1-D6,D7-D12 and D13-D18. All the three transistors try to breakover when the power is on. But only one of them could breakover at the first place due to the difference of the components. If the Q1 goes to breakover firstly, the D1-D6 will start light. As it shown on below diagram, 18 pieces of LED have been divided into three groups: D1-D6,D7-D12 and D13-D18. All the three transistors try to breakover when the power is on. But only one of them could breakover at the first place due to the difference of the components. If the Q1 goes to breakover firstly, the D1-D6 will start light. Because the collector voltage will be reduced which let the left side of C1 reduced to about 0V when the Q1 is on. As it cannot have a sudden change on the voltage of two ends of the capacitance, the base of Q2 has been reduced to 0V too. Then the Q2 is off and the D7-D12 turn off. But at this time, the high voltage of Q2 goes through C2 which make the voltage of Q3 base increased and let the Q3 on immediately. Then the D13-18 turn on. The collectors of both Q1 and Q3 are with low voltage during this period. And the D1-D6 and D13-D18 turn on, while D7-D12 turn off. But the collector voltage will be increased gradually after C1 has been charged by the power via R3. When the voltage is over 0.7V, Q2 enters a conducting state. And the collector voltage will increase which let the D13-D18 turn off. The circuit will operate according to this cycle that the 18 pieces of LED will be turned on by turns and 2 groups will be turned on at the same time.
Note:
The position of the LEDs is adjustable. But the LEDs with the same color should be put in the same group in parallel.
The flash frequency will be changed according to the capacitance.
3. Circuit Diagram
4.List  of  Components
Item Oder
Item Name
Specifications
Code
Item Oder
Item Name
Specifications
Code
01
Resistor
10K
R1  R3  R5
08
LED
5MM Green to Green
D13----D18
02
Resistor
560R
R2（Red LED）
09
Transistor
9014
Q1  Q2  Q3
03
Resistor
220R
R4（Yellow LED）
10
C
able
T
erminal
XH2.54 2P (Horizontal)
J1
04
Resistor
47R
R6（Green LED）
11
Power Wire
2P 15MM
1
05
Resistor
22uF/25V
C1  C2  C3
12
PCB
5.1MM*4.8MM
1
06
LED
5MM
Red to Red
D1----D6
13
Battery Case
2×AA
1
07
LED
5MM
Yellow to Yellow
D7----D12
14
Payment Method
Shipping Policy
Returns & Refund Policy
Feedback
Payment Method
EBAY Managed Payment.
But we only
Accept
your
Ebay Address
, please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping Policy
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
Returns & Refund Policy
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.