-40%

Prewired LED Light Assembly with on/off switch and 9 volt battery connector.

$ 4.19

Availability: 8089 in stock
  • Condition: New
  • Nominal Current Rating: 15 mA
  • LED Size: 5 mm
  • Luminous Flux: 3.21 lm
  • Number of LEDs: 1
  • MPN: Does Not Apply
  • Lens Shape: Dome
  • Modified Item: No
  • Custom Bundle: No
  • Viewing Angle: 30°
  • Mounting Style: Stand Alone
  • Configuration: Single
  • Brand: Unbranded
  • All returns accepted: ReturnsNotAccepted
  • Nominal Voltage: 9 Volt Battery
  • LED Color: Red, Blue, Green, Yellow, Orange, White, Purple
  • Wavelength: Visible
  • Number of Pins: 2
  • Type: LED Light
  • Brightness: 15 cd/m2
  • Light Intensity: 15000 mcd
  • Lens Surface: Clear
  • Country/Region of Manufacture: China

    Description

    Want to add some light you your next project? These LED assemblies are very affordable and offer really clean bright light to any project.
    Specifications:
    Length - Approximately 15" (Switch located in the middle at ~7.5")
    LED is 5mm diameter x 10mm long
    9 Volt Battery
    (Not Included)
    Switch - 8mm wide X 15mm long X 8mm high - Click on / Click off
    Operating Temperature 105 F (41 C)
    White Led Intensity is 15000 mcd with a 30 deg apex angle (~3.21 Lumens)
    15-20mA current draw (depends on color, white draws the most at 20mA)
    Typical 9 volt battery has 500mA hour capacity, continuous use would provide ~25 hours of light
    All batteries are different, so 25 hours is an average, if it is turned off some times the life will be much longer.
    Also used in Cake LED Light Decorating, Cosplay Costumes, Model Police and Fire Trucks, Doll Houses and more. Shipping and Handling is flat rate for 1st LED assembly, each additional LED only adds {{detail_product_description}}.25 to total shipping cost. Available in White, Red, Green, Blue, Orange,Pink, Purple, Yellow, and
    New
    - Yellow Candle Flicker (simulates candle flame)