Seco Walleye Prism System With 5/8 x 11 Adapter

Description

The Seco Walleye Prism System accommodates a full size 62 mm prism for long range applications or when a larger prism is needed. Features include a -40 mm offset, ± 2 mm, ability to pivot in two axes, and a stainless-steel locking type.
Plus, this prism has a rain hood that helps keep the prism clean to ensure continual measurements over a long measuring cycle. The flat bottom of this L-Bracket measures 2.3 x 3.4 inches with five holes suitable for mounting to a variety of surfaces.
It also has a center pivot hole which measures 3/8-inch and four screw holes with 11/64-inch outer diameter. The system is compatible with all M20 screw-in type prism canisters.
Configuration Options
The Seco Walleye Prism System comes in two adapter threading for increased flexibility. Choose your preference in the drop-down section above.
6603-00:
With 5/8 x 11 Adapter
6603-01:
With M8 Adapter
Seco Walleye Prism System
Available Package Options
Adapters:
5/8 x 11 Adapter, or M8 Adapter
Choice of 2 threading adapters
Features include a -40 mm offset, ± 2 mm
Ability to pivot in two axes
Stainless-steel locking
Accommodates a full size 62 mm prism
Rain hood helps keep the prism clean
Components available individually so you can configure your specific needs
Flat bottom of the L-Bracket is a large 2.3 x 3.4 inches with five holes for mounting to a variety of surfaces
Center pivot hole is 3/8-inch (9.5 mm)
Four screw holes have 11/64-inch (4.5 mm) OD
Compatible with all M20 screw-in type prism canisters
The system weighs 1.55 lb. (0.70 kg)